TRIULZI SY2500.6.2.4 - Year 2010

TRIULZI SY2500.6.2.4 - Year 2010
HORIZONTAL WASHING MACHINE DRYER
THE MACHINE IS SUITABLE FOR WASHING STANDARD FLOAT GLASS (not Low-E)
SY= motorized device for lifting the upper part of 500 mm per
maintenance via jacks and motorized device for glass thicknesses max 35 mm
Useful working width 2500 mm
6=number of brushes
2=number of tanks
4=number of blowers
The machine is composed of:
1) Entry with motorized rollers
2) Upper pre-wash with non-returnable water + air blade
3) Washing with 3 pairs of cylindrical brushes and 2 tubs
4) Drying with 2 pairs of air blades and 1 fan above
5) Exit with motorized rollers
Useful working width: 2500 mm
Minimum glass size: L x W 300 x 150 mm
Fixed side for small glass passage LEFT - seen from the entrance
Water connection: LEFT side - seen from the entrance
Water drain: RIGHT side - seen from the entrance
Extraction of tanks: LEFT side - seen from the entrance
Position of the electrical panel and pushbutton panel LEFT side - seen from the entrance
Adjustable working speed: via INVERTER from 2 to 7 M/MIN
Worktop height: 920 +- 30 mm
Voltage - Phases - Frequency: V.380AC 3 50 Hz
Auxiliary voltage: V.24 AC
Total installed engine power: approximately 25 KW
Glass thickness: from 3 to 8 mm
Self-adjusting Via motorized device: up to 35 mm
Maintenance lifting: Up to 500 mm
Interfaces/ PLC/ P.O.

MALNATI 100 T Serie - Year 1989

MALNATI 100 T Serie - Year 1989
Horizontal Washer/Dryer
Useful width (mm) About 1000
Entrance roller conveyor (mm) 680
Output roller conveyor (mm) 750
Worktop height (mm) 910
Total width (mm) 1800
Total length (mm) 2650
Total height (mm) 1400
Minimum washable dimensions (mm) 100 x 100
Washable thicknesses (mm) 3 – 19
Manual thickness adjustment
Work speed (m/min) 1 – 4
Manual speed adjustment
Roller diameter 33
n° of cylindrical brushes 4
Brush diameter (mm) 67
number of pumps / washing area 1
no. of blowers 4
number of fans 1
​

TRIULZI TOSCANA-SPL.800.4.2.4
​

TRIULZI TOSCANA-SPL.800.4.2.4
Horizontal washing drying machine for small glasses 100 x 50 mm.
4 Brushes
Thickness 2-8 mm
This machine has been planned for the washing of flat glass sheets of small dimensions. Top prewashing. Washing effected by two pairs of cylindrical brushes which are constantly wetted by water sprayers. Drying by means of 2 pairs of blowers fed by high-pressure fan. Rubberized vulcanized and rectified conveyor rollers. Electronic speed adjustment by inverter, with digital display. All parts in contact with the water are made of stainless steel. Sound pressure level within the standards. Optional device for the thickness adjustment from 2 to 30 mm with display. Motorized height adjustment device of the upper section up to 500 mm for quick inspection. Further pairs of cylindrical brushes complete with tank. Water heating with electrical heating element, thermostat and level switch. Top air knife after pre-washing. Modifications on particular requirements.
 
Working width 810-1010 mm
Working speed 2-8 m/min.

TRIULZI ST 1310 4.1.4 - Year 2000

TRIULZI ST 1310 4.1.4 - Year 2000
Horizontal Washing Machine
Working width 1310 mm
Min. glass 240x100 mm
Working height 920 mm
Working speed 2-8 m/min.
Power 12,5 kW

QUARANTA QNBE6 1600 CS – Year 2002

QUARANTA QNBE6 1600 CS – Year 2002
Horizontal Washing Machine
Working Dimensions 1600 mm