LISEC TAL-60

LISEC KHB-30 – 2000

LISEC TAL-60
System for Manual Sealing of I.G. Units Using 1- and 2-Component Sealants
Profile width 6 - 24 mm
Bracket length 4,3 m, optional extension by 1 m
Catalyst drum Ø 280 mm

LISEC KHB-30 – 2000
FREEZER
DEVICE FOR DELAYING THE CURING OF MIXED 2 PART SEALANT

MARVAL L 35/P

MARVAL L 35/P
Hotmelt Extruder
35 Liters
Power 8,5 kW - 380 V
900 x 550 x 1350 (height)
Weight 260 Kg

MARVAL L 35/P - Year 1996

MARVAL L 35/P - Year 1996
Hotmelt Extruder
35 Liters
Power 8,5 kW - 380 V
900 x 550 x 1350 (height)
Weight 260 Kg

DELTAMAX 3190 GLASS INSPECTOR 3 TVC - Year 2017

DELTAMAX 3190 GLASS INSPECTOR 3 TVC - Year 2010
H 2500 mm
Flaw detection system for double glazing lines
Works with all types of transparent glass (including low-e, selective, colored paste).
Inspect glass with any shape.
Image resolution: 0.2 mm/pixel.
Minimum size of detectable defects: 0.4mm/pixel.
Maximum inspection thickness: 50mm.
Maximum line speed: 60m/min.
Refurbished in 2024
​With warranty

EMAR - Turnable Table - Year 2003

EMAR - Year 2003
Turnable table

TRIULZI K700 TOP - Year 2008

INTERGLAS AR-GAS-100

INTERGLAS AR-GAS-100
Automatic Gas Filler
Gas pressure 0,5-2,5 atm.
​

INTERGLAS AR-GAS-100 P

INTERGLAS AR-GAS-100 P
Automatic Gas Filler
Gas pressure 0,5-2,5 atm.

GRACO 

GRACO Bicomponent Extruder
GRACO Estrusore Bicomponente

FOREL CR 2250 A3 – Year 2007

FOREL CR 2250 A3 – Year 2007
Automatic Coating Remover
- DIFFERENT VERSIONS AVAILABLE TO REMOVE ANY EXISTING KIND OF COATING
- TOTAL REMOVAL OF COATINGS GUARENTEED FOR SEALANT ADHESION
- HIGH SPEED CYCLE TIMES TO MAXIMISE PRODUCTION SCHEDULES
Max Working Glass Height 2500 mm
Compressed Air 300 Nl/Min. 6 Bar
Power 8 kW

TRIULZI K700 TOP - Year 2008
Butyl Machine
Butilatrice

EMAR M101 - Year 2000

EMAR M101 - Year 2000
HOT MELT PANES EXTRUDER LT 50 Mod. M 101
POWER SUPPLY: 400 Vac. THREE PHASE + NEUTRAL 50 Hz.
TOTAL ABSORBED POWER: 7.5 Kw. 400 Vac 50 Hz.
PUMP MOTOR: 2.2 Kw. 400 Vac. THREE PHASE 50Hz.
HOT MELT TANK CAPACITY: MAX. 50 LT.
INTERNAL DIAMETER OF THE TANK: 250 mm.
EXTRUSION CAPACITY: FROM ZERO TO 0.7 Kg / Min.
HEIGHT: 1300 mm. approximately
LENGTH: 700 mm. approximately
WIDTH: 1000 mm. approximately
WEIGHT: about 350 Kg

GRACO K03C

Estrusore
Extruder

LISEC A1RL – Year 2004

LISEC A1RL – Year 2004
Automated Desiccant Filling Machine for Bent Spacer Frames
Profile width 6 - 24 mm
Profile height 6 - 8,5 m
Minimum size 150 x 150 mm
Max. size depending on the aspect ratio of the frame
2,000 x 2,000 mm, 2,500 x 1,500 mm, 3,000 x 1,000 mm
Possible materials
aluminum, optional: steel, stainless steel
​
​

STEFANI

STEFANI
Butyl Machine